Zirconia Solutions with Initial from GC

With the Initial Zirconia solutions, a tailored solution is offered to master every indication in an efficient way with the high quality that’s expected from GC.

Paint-on-zirconia

Courtesy: MDT Ralf Dahl, Germany

Individualised layering

Courtesy: MDT Ralf Dahl, Germany

Painting & micro-layering

Courtesy: MDT Benjamin Detrez, France

Individualised layering

Courtesy: MDT Michael Brusch, Germany

Initial Zirconia Disk
ST/HT/UHT

Initial Zirconia Disk
Multilayer Elite

Initial Zirconia
Coloring Liquid

Initial IQ ONE SQIN

Initial Zr-FS

Framework

ST – Standard Translucency
HT – High Translucency
UHT – Ultra-High Translucency

Up to 1200 MPa (ST & HT)
Up to 600 MPa (UHT)

GC Initial Zirconia Disks exhibit excellent biocompatibility, rigidity, and optimal edge stability. Thanks to the perfect balance between strength and aesthetic possibilities, the most stunning monolithical restorations can be created with a perfect transition from the gingiva to the tooth.

Three translucency levels: natural aesthetics or strong ability to mask discoloration

Optimal edge stability and millability

Reduced inventory, can be used for any tooth shade

Customisation with Initial Zirconia Coloring Liquid, IQ ONE SQIN and/or Zr-FS

Choose ST or HT for hybrid abutments or multi-unit abutments / full-arch restorations

Superior aesthetics

True-to-nature shade and translucency gradient for anterior and posterior restorations.

High strength

Classified as a Class V according to
DIN EN ISO 6872 with a mean value of >1.100 MPa.

Omni-functional

Versatile and suitable for a broad range of clinical indications. Fast sintering or regular sintering.

Zirconium dioxide Type II Class V DIN EN ISO 6872

Flexural strength: typical mean value >1.100 MPa

High translucency gradient from >45% to >49%

Fast sintering for crowns and bridges up to 3 units

Natural gradient

Stunningly natural: a seamless gradient from cervical to incisal, in shade as well as translucency gradients, mimicking the natural tooth structure in the best possible way.

Superior aesthetics with a combined shade and translucency gradient.

High strength throughout all layers, making it suitable for a wide range of indications.

Limits the required finishing with a framework in the right colour tone.

Optimal synergy with Initial Zirconia Coloring Liquid and the IQ ONE SQIN concept for high-end individualisation.

All 16 V-shades and 3 bleach types are available in 14, 16, 20 & 25 mm thick disks with a diameter of 98.5 mm.

Framework characterisations

Paint

Ultimate frame customisation

Precisely controlled and localised colour penetration.

Reduces the need for post-sintering colour adjustments.

Dip

Deep, even colour distribution

Consistent and reproducible results in a fast and easy manner.

Colour your white blank

Courtesy: MDT Stefan Roozen, Austria

Pimp your multilayered disk

Courtesy: MDT Patrick Freudenthal, Sweden

Finishing

With GC Initial IQ ONE SQIN – the paintable colour-and-form ceramic system – you can quickly and easily achieve high aesthetic results, comparable to conventionally layered restorations but with a significant time gain.

Courtesy: MDT Stefan Roozen, Austria

Discover Initial IQ ONE SQIN

Initial Zr-FS is a refined feldspar based veneering ceramic for use with high strength zirconia frameworks. The unequalled natural optical effects and increased stability after multiple firings, make it ideal for the fabrication of high demanding aesthetical crowns, complex and delicate substructures such as bridges on teeth or implants.

Courtesy: MDT Ralf Dahl, Germany

Courtesy: MDT Justyna Kasta, Poland

Courtesy: MDT Maximiliano Paterlini, Spain

Courtesy: MDT Maximiliano Paterlini, Spain

Both white and red aesthetics

To make gingival restorations with Initial even more aesthetic and more natural, the add-on set Initial Zr-FS Gum Shades meets all the requirements for highly aesthetic gingival reproductions.

Luting solutions

GC FujiCEM Evolve

Resin modified glass ionomer cement

G-CEM ONE

Universal adhesive resin cemen

Strong bonding to tooth and restoration, especially to zirconia
Quick and easy: no need for separate etching or bonding
Excellent marginal seal: chemical adhesion to tooth structure
Moisture-tolerant: when absolute isolation cannot be guaranteed
Rubbery consistency: easy excess removal, with tack-cure option

Truly universal: for all indications and all types of restorations
Invisible margins: high wear resistance and colour stability in 4 different shades
Excellent marginal seal: chemical adhesion to tooth structure
Adhesive Enhancing Primer

GC FujiCEM Evolve

Resin modified glass ionomer cement

Strong bonding to tooth and restoration, especially to zirconia
Quick and easy: no need for separate etching or bonding
Excellent marginal seal: chemical adhesion to tooth structure
Moisture-tolerant: when absolute isolation cannot be guaranteed
Rubbery consistency: easy excess removal, with tack-cure option

G-CEM ONE

Universal adhesive resin cemen

Truly universal: for all indications and all types of restorations
Invisible margins: high wear resistance and colour stability in 4 different shades
Excellent marginal seal: chemical adhesion to tooth structure
Adhesive Enhancing Primer

Downloads

Leaflets

Zirconia solutions

Initial IQ ONE SQIN

Quick Start Guide Zirconia Liquid

Zirconia Solutions with Initial from GC

With the Initial Zirconia solutions, a tailored solution is offered to master every indication in an efficient way with the high quality that’s expected from GC.

Paint-on-zirconia

Individualised layering

Painting & micro-layering

Individualised layering

Framework

ST – Standard Translucency

HT – High Translucency

UHT – Ultra-High Translucency

Up to 1200 MPa (ST & HT)

Up to 600 MPa (UHT)

GC Initial Zirconia Disks exhibit excellent biocompatibility, rigidity, and optimal edge stability. Thanks to the perfect balance between strength and aesthetic possibilities, the most stunning monolithical restorations can be created with a perfect transition from the gingiva to the tooth.

Three translucency levels: natural aesthetics or strong ability to mask discoloration

Optimal edge stability and millability

Reduced inventory, can be used for any tooth shade

Customisation with Initial Zirconia Coloring Liquid, IQ ONE SQIN and/or Zr-FS

Choose ST or HT for hybrid abutments or multi-unit abutments / full-arch restorations

Superior aesthetics

True-to-nature shade and translucency gradient for anterior and posterior restorations.

High strength

Classified as a Class V according to DIN EN ISO 6872 with a mean value of >1.100 MPa.

Omni-functional

Versatile and suitable for a broad range of clinical indications. Fast sintering or regular sintering.

Zirconium dioxide Type II Class V DIN EN ISO 6872

Flexural strength: typical mean value >1.100 MPa

High translucency gradient from >45% to >49%

Fast sintering for crowns and bridges up to 3 units

Natural gradient

Stunningly natural: a seamless gradient from cervical to incisal, in shade as well as translucency gradients, mimicking the natural tooth structure in the best possible way.

Superior aesthetics with a combined shade and translucency gradient.

High strength throughout all layers, making it suitable for a wide range of indications.

Limits the required finishing with a framework in the right colour tone.

Optimal synergy with Initial Zirconia Coloring Liquid and the IQ ONE SQIN concept for high-end individualisation.

All 16 V-shades and 3 bleach types are available in 14, 16, 20 & 25 mm thick disks with a diameter of 98.5 mm.

Framework characterisations

Paint

Ultimate frame customisation

Dip

Deep, even colour distribution

Colour your white blank

Pimp your multilayered disk

Finishing

With GC Initial IQ ONE SQIN – the paintable colour-and-form ceramic system – you can quickly and easily achieve high aesthetic results, comparable to conventionally layered restorations but with a significant time gain.

Both white and red aesthetics

To make gingival restorations with Initial even more aesthetic and more natural, the add-on set Initial Zr-FS Gum Shades meets all the requirements for highly aesthetic gingival reproductions.

Luting solutions

Resin modified glass ionomer cement

Universal adhesive resin cemen

Strong bonding to tooth and restoration, especially to zirconia

Quick and easy: no need for separate etching or bonding

Excellent marginal seal: chemical adhesion to tooth structure

Moisture-tolerant: when absolute isolation cannot be guaranteed

Rubbery consistency: easy excess removal, with tack-cure option

Truly universal: for all indications and all types of restorations

Invisible margins: high wear resistance and colour stability in 4 different shades

Excellent marginal seal: chemical adhesion to tooth structure

Adhesive Enhancing Primer

Resin modified glass ionomer cement

Strong bonding to tooth and restoration, especially to zirconia

Quick and easy: no need for separate etching or bonding

Excellent marginal seal: chemical adhesion to tooth structure

Moisture-tolerant: when absolute isolation cannot be guaranteed

Rubbery consistency: easy excess removal, with tack-cure option

Universal adhesive resin cemen

Truly universal: for all indications and all types of restorations

Invisible margins: high wear resistance and colour stability in 4 different shades

Excellent marginal seal: chemical adhesion to tooth structure

Adhesive Enhancing Primer

Downloads

Leaflets

Articles

Videos

Workflow

Classified as a Class V according to
DIN EN ISO 6872 with a mean value of >1.100 MPa.